Magewell develops innovative, high-performance video I/O and IP workflow solutions that seamlessly bridge signals, software, streams, and screens. The simplicity, reliability, and cost-effectiveness of Magewell’s capture, conversion, and streaming products make them the preferred choice of integrators and end-users for bringing high-quality AV signals into and out of IP networks and popular software. Magewell solutions power applications including live streaming, event production, video conferencing, multi-site video distribution, remote learning, medical imaging, and more.
Modator 2U
High Density Rackmount Form Factor for Encoders & Decoders
Modator Series
For years, Magewell has been a market leader in helping production and AV professionals bridge traditional and IP-based media workflows with innovative solutions to convert between signals and streams. Magewell's new Modator family brings the reliability and low-latency performance of the company's standalone encoders and decoders to a high-density, modular, rackmount form factor. The Modator 2U chassis fits standard rack deployments and supports up to 10 Modator modules.
Modator 2U
- 2 RU Form Factor.
- 10 Modator slots supporting hot swap of Magewell modules.
- 1 RJ45 1000Mbps Ethernet port.
- 1 USB Type-C port for configuration.
- Hot-swappable dual power supply.
- AC: 100-240V, 7-3.5A, 60/50Hz.
- Maximum power consumption of the chassis: 200W
- Maximum power consumption of each slot: 20W
- Touchscreen dimension: 91mm x 81mm
- Browser-based web user interface for the chassis and modules information.
- HTTP-based APIs for custom integration.
Converts 2Kp60 NDI®/SRT stream into HD SDI and HDMI signal.
- Decode up to 2Kp60 streams of NDI High Bandwidth , NDI® |HX, NDI® |HX2, NDI® |HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP, TVU protocols
- 3G-SDI and HDMI 1.4 Output
- Decode up to 1920x1080p60 4:2:0 8-bit
- 8-channels audio
Converts 2Kp60 NDI®/SRT stream into HD HDMI signal.
- Decode up to 2Kp60 streams of NDI High Bandwidth , NDI® |HX, NDI® |HX2, NDI® |HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP, TVU protocols
- HDMI 2.0 Output
- Decode up to 2K 60fps 4:4:4 8-bit
- 8-channels audio
Converts 4Kp60 NDI®/SRT stream into UHD HDMI signal.
- Decoding up to 4Kp60 streams of NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP and TVU ISSP protocols.
- HDMI 2.0 Output
- Decode up to 4096x2160 60fps 4:4:4 8-bit
- 8-channels audio
Pro Convert HDMI 4K Plus Module
Converts HDMI input signal into high-bandwidth 4Kp60 NDI® with loop-through.
- HDMI 2.0 Input with loop-through
- Supports up to 4096x2160/3840x2160 60fps 4:4:4 input.
- Encode and output real-time streams of NDI High Bandwidth® at up to 4096x2160 60fps 4:2:2 8-bit
Pro Convert HDMI Plus Module
Converts HDMI input signal into high-bandwidth 2Kp60 NDI® with loop-through.
- HDMI 1.4a Input with loop-through
- Supports up to 4096x2160/3840x2160 30fps 4:4:4/4:2:2 or 60fps 4:2:0 input.
- Encode and output real-time streams of NDI High Bandwidth® at up to 2048x2160 120fps 4:2:2 8-bit
Pro Convert 12G SDI 4K Plus Module
Converts a 12G-SDI input signal into NDI® High-Bandwidth with loop-through.
- Single-link 12G-SDI input and loop-through
- Support for up to 4096x2160 60fps input
- Support for 16-channel SDI embedded audio inputs.
- Support for up to 4096x2160 60fps 4:2:2 8-bit NDI encoding.
Ultra Encode SDI Plus Module
Converts 6G-SDI input signal into 4Kp3RTMP, RTMPS, RTSP, SRT, NDI HX2, NDI HX3, HLS, UDP, TVU ISSP with loop-through.
- 6G-SDI Input with loop-through
- Support up to 4096x2160/3840x2160 30fps 4:4:4/4:2:2 input.
- Encode up to 4Kp30 4:2:0 8-bit with 8 channels audio.
- NDI HX3: up to 62.0Mbps, down to 1.5Mbps
- Others: up to 32.0Mbps, down to 256kpbs
Converts HD HDMI input signal into 4Kp30 RTMP, RTMPS, RTSP, SRT, NDI HX2, NDI HX3, HLS, UDP, TVU ISSP with loop-through..
- HDMI 1.4a Input with loop-through
- Support up to 4096x2160/3840x2160 30fps 4:4:4/4:2:2 input.
- Encode up to 4Kp30 4:2:0 8-bit with 8 channels audio.
- NDI HX3: up to 62.0Mbps, down to 1.5Mbps
- Others: up to 32.0Mbps, down to 256kpbs
SRT Encoders
Quick Guide to Magewell SRT Encoders
Ultra Encode AIO
- Main Stream up to 4096x2160p30.
- Sub Stream up to 1080p60
- SDI & HDMI Inputs with Loop Through.
- H.264/265 Encoding.
- 8-Ch AAC Audio.
- Up to 6x Simultaneous Streams.
- 32 Mb/s max bitrate.
- RTMP, RTMPS, SRT (Caller or Listener), HLS Pull, RTSP, TS over UDP & RTP, TVU ISSP.
- NDI® HX2, NDI® HX3.
- Mix HDMI & SDI in PIP or Side by Side.
- Recording on SD Card & USB External Stora
Ultra Encode SDI Plus
- Main Stream up to 4096x2160p30.
- Sub Stream up to 1080p60
- SDI Input with Loop Through.
- H.264/265 Encoding.
- 8-Ch AAC Audio.
- Up to 6x Simultaneous Streams.
- 32 Mb/s max bitrate.
- RTMP, RTMPS, SRT (Caller or Listener), HLS Pull, RTSP, TS over UDP & RTP, TVU ISSP.
- NDI® HX2, NDI® HX3.
- Recording on SD Card & USB External Storage.
- PoE
- Standalone box with 1RU rackmount shelf and mounting kit (not included)
Ultra Encode SDI
- Main Stream up to 2048x1080p60 .
- Sub Stream up to 1080p60
- SDI Input with Loop Through.
- H.264/265 Encoding.
- 2-Ch AAC Audio.
- Up to 6x Simultaneous Streams.
- 16 Mb/s max bitrate.
- RTMP, RTMPS, SRT (Caller or Listener), HLS Pull, RTSP, TS over UDP & RTP, TVU ISSP.
- NDI® HX2
- Standalone box with 1RU rackmount shelf and mounting kit (not included)
Ultra Encode HDMI Plus
- Main Stream up to 4096x2160p30.
- Sub Stream up to 1080p60
- HDMI Input with Loop Through.
- H.264/265 Encoding.
- 8-Ch AAC Audio.
- Up to 6x Simultaneous Streams.
- 32 Mb/s max bitrate.
- RTMP, RTMPS, SRT (Caller or Listener), HLS Pull, RTSP, TS over UDP & RTP, TVU ISSP.
- NDI® HX2, NDI® HX3.
- Recording on SD Card & USB External Storage.
- PoE
- Standalone box with 1RU rackmount shelf and mounting kit (not included)
Ultra Encode HDMI
- Main Stream up to 2048x1080p60 .
- Sub Stream up to 1080p60
- HDMI Input with Loop Through.
- H.264/265 Encoding.
- 2-Ch AAC Audio.
- Up to 6x Simultaneous Streams.
- 16 Mb/s max bitrate.
- RTMP, RTMPS, SRT (Caller or Listener), HLS Pull, RTSP, TS over UDP & RTP, TVU ISSP.
- NDI® HX2
- Standalone box with 1RU rackmount shelf and mounting kit (not included)
Pro Convert IP Decoders
Expanded IP Protocols Interoperability - Enhanced Video Format including HDR10/HDR HLG
Pro Convert IP to USB
Capture an NDI®, NDI® HX or streaming source into software via USB Type-C.
- Decode one stream of NDI® High Bandwidth, NDI® HX2, NDI® HX3, RTMP, RTSP, RTP, UDP, SRT, HTTP at up to 1080p60
- Decode H.264/H.265
- Support NDI® 6
Pro Convert IP to HDMI
Converts up to four IP streams into one HD HDMI signal.
- Support NDI High Bandwidth, NDI HX2, NDI HX3, MPEG-TS over RTP/UDP/SRT/RIST, RTMP, RTSP, HTTP, HLS and ZIXI protocols.
- Support decoding 1 stream of up to 2560x1440p60 in H.264/H.265, SpeedHQ, and MPEG2 format.
Support multiview layouts
Pro Convert IP to HDMI 4K
Converts up to four IP streams into one 4Kp60 HDMI signal.
- Support NDI High Bandwidth, NDI HX2, NDI HX3, SRT, MPEG-TS over RTP/UDP/RIST, RTMP, RTSP, HLS, HTTP, and ZIXI protocols
- Support decoding 1 stream of H.264, H.265, SpeedHQ or MPEG2 at up to 4096x2160p60
- Support multiview layouts
Pro Convert IP to AIO 4K
Converts up to four IP streams into one 4Kp60 HDMI and SDI signal.
- Support NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3, SRT, MPEG-TS over RTP/UDP/RIST, RTMP, RTSP, HLS, HTTP, and ZIXI protocols
- Support decoding 1 stream of H.264, H.265, SpeedHQ or MPEG2 at up to 4096x2160p60
- Support multiview layouts.
SRT/NDI Decoders
Quick Guide to Magewell IP Decoders
Pro Convert HDMI
Pro Convert for NDI® to HDMI is an NDI/SRT to HDMDecode
- Support for up to 4096x2160 60fps HDMI output (integrated up-conversion from HD sources).
- Supports 96KHz 8-channel audio output
- Support for decoding up to 2Kp60 NDI streams.
- Support for decoding full NDI® and NDI®|HX.
- Discover NDI devices across network segments supports NDI 5.x
- Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP.
- Very low latency.
Pro Convert HDMI 4K
Pro Convert for NDI® to HDMI 4K is an NDI/SRT to HDMI 2.0 Decoder.
- Support for up to 4096x2160 60fps HDMI output.
- Supports 96KHz 16-bit 8-channel audio output.
- Support for decoding up to 4Kp60 NDI streams.
- Support for decoding full NDI® and NDI®|HX.
- Discover NDI devices across network segments and supports NDI 5.x
- Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, - HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP.
- Very low latency.
- PoE
Pro Convert AIO
Pro Convert for NDI® to AIO is an NDI/SRT to SDI & HDMI Decoder.
- Support for up to 1920x1080 60fps HDMI and SDI output.
- Supports 48KHz 8-channel audio output.
- Support for decoding up to 2Kp60 NDI streams.
- Support for decoding full NDI® and NDI®|HX.
- Discover NDI devices across network segments and supports NDI 5.x
- Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, - HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP.
- Very low latency.
- PoE
Pro Convert SDI
Pro Convert for NDI® to SDI is an NDI/SRT to SDI Decoder
- Support for up to 1920x1080 60fps SDI output (integrated up-conversion from HD sources).
- Supports 48KHz 8-channel audio output
- Support for decoding up to 2Kp60 NDI streams.
- Support for decoding full NDI® and NDI®|HX.
- Discover NDI devices across network segments supports NDI 5.x
- Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP.
- Very low latency.
-
Streaming Encoders
Quick Guide to Magewell Streaming Encoders
Ultra Stream SDI
Magewell Ultra Stream™ SDI Live Streaming and Recording Encoder.
- Stand-alone device; no computer required.
- Support for up to 2048x1080p 60fps SDI input with loop-through.
- 2-channel AAC at 48kHz, 16-bit Embedded Audio and 3.5mm Voice Over Input.
- Internet connectivity via wired Ethernet, Wi-Fi and optional USB 3G/4G modem support.
- Control via on-device buttons, intuitive smartphone App or browser-based interface.
- AC Adapter
Ultra Stream HDMI
Magewell Ultra Stream™ HDMI Live Streaming and Recording Encoder.
- Stand-alone device; no computer required.
- Support for up to 4096x2160 4:4:4/4:2:2 30fps or 4096x2160 4:2:0 60fps HDMI input with loop-through.
- 2-channel AAC at 48kHz, 16-bit Embedded Audio and 3.5mm Voice Over Input.
- Internet connectivity via wired Ethernet, Wi-Fi and optional USB 3G/4G modem support.
- Control via on-device buttons, intuitive smartphone App or browser-based interface.
- AC Adapter
Ultra Stream App
Magewell Ultra Stream App is a mobile application that works with Magewell Ultra Stream encoders. It can help users complete the initial setup, access the advanced features of the Ultra Stream and upgrade the device’s firmware. Users can also use the App to monitor the video in the smart phone.
IP<->Analog I/O Audio Interface
Quick Guide to Analog <-> IP Audio Converters
Pro Convert AES67
Magewell Pro Convert AES67 offers a seamless bridge between analog audio, software and IP standards including AES67, NDI®, SRT and more.
Provides a flexible, virtual audio matrix to allow routing or mixing of any analog or IP-based input channel to any output.
Enables mixed-technology local and remote production workflows and ProAV installations.
Pro Convert Audio DX
Magewell Pro Convert Audio DX offers a seamless bridge between analog audio, software and IP standards including Dante®, NDI®, SRT and more.
Provides a flexible, virtual audio matrix to allow routing or mixing of any analog or IP-based input channel to any output.
Enables mixed-technology local and remote production workflows and ProAV installations .
SDI to NDI Encoders
Quick Guide to SDI -> NDI Encoders
Pro Convert 12G SDI 4K Plus
Magewell Pro Convert SDI 4K Plus is a standalone 1-channel 12G SDI to full bandwidth NDI 5.x encoder with video loop-through, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light, and one L bracket.
Pro Convert SDI 4K Plus
Magewell Pro Convert SDI 4K Plus is a standalone 1-channel 6G SDI to full bandwidth NDI 5.x encoder with video loop-through, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light, and one L bracket.
Pro Convert SDI Plus
Magewell Pro Convert SDI is a standalone 1-channel 3G SDI to full bandwidth NDI 5.x encoder with video loop-through, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light, and one L bracket.
Pro Convert SDI TX
Magewell Pro Convert SDI TX is a standalone 1-channel 3G SDI to full bandwidth NDI 5.x encoder, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light, and one L bracket.
HDMI to NDI Encoders
Quick Guide to HDMI -> NDI Encoders
Pro Convert HDMI 4K Plus
Magewell Pro Convert HDMI 4K Plus is a standalone 1-channel 4K HDMI 4Kp60 4:4:4 to full bandwidth NDI 5.x encoder with video loop-through, POE. Accessories include power adapter, USB power cable, Mini DIN8 to DIN8+DB9 cable, tally light, and one L bracket.
Pro Convert HDMI Plus
Magewell Pro Convert HDMI Plus is a standalone 1-channel 4096x2160 60fps (4:2:0) or 30fps (4:4:4) down converting them to full bandwidth HD NDI 5.x encoder with video loop-through, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light and one L bracket.
Pro Convert HDMI TX
Magewell Pro Convert HDMI TX is a standalone 1-channel HD HDMI to full bandwidth NDI 5.x encoder, POE. Accessories include one power adapter, one USB power cable, one Mini DIN8 to DIN8+DB9 cable, one tally light, and one L bracket.
USB Capture
Cost-Effective Driver-free installation and automatic input detection for true plug-and-play USB Capture operation
USB Capture HDMI Gen 2
Capture videos up to 2048x2160, frame rates up to 120fps.
Capture HDMI + 2ch embedded audio
USB Capture SDI Gen 2
Capture videos up to 4096x2160, frame rates up to 120fps.
Capture HDMI + 2ch embedded audio
USB Capture AIO
Captures one of the following
- 3G-SDI + embedded audio + analog audio
- HDMI + embedded audio + analog audio
- DVI + audio, VGA + audio
- Component/Composite/S-video + audio
Capture videos up to 2048x1080, frame rates up to 120fps.
Utility V3 is a software for USB Capture and USB Capture Plus devices. Users can easily check and set the capture-related parameters, upgrade the firmware by themselves and export info needed for technical support with the help of the Utility.
Our USB Capture HDMI and USB Capture HDMI Plus models have now been certified by Zoom for wired content capture with Zoom Rooms. The new certification offers integrators and end-users an added level of confidence that the products have been thoroughly tested for assured compatibility.
USB Capture Plus
Input Loop-through Driver-free installation and automatic input detection for true plug-and-play USB 3.0 Capture operation
USB Capture HDMI Plus
USB 3.0, compatible with USB 2.0
compatible with USB 3.1 Gen 1
Capture videos up to 2048x2160, frame rates up to 120fps.
Capture HDMI + 2ch embedded audio
Loop-through HDMI signal
Audio input via mic
Extract HDMI embedded audio output via headphones
Support HDMI 1.4 4K30p 4:4:4 4Kp60 4:2:0 input. Capture from the newest game consoles such as PS4 Pro and XBOX One S. Automatically down scale to 2K for recording or streaming
USB Capture HDMI 4K Plus
USB 3.0, compatible with USB 2.0
compatible with USB 3.1 Gen 1
Capture videos up to 4096x2160, frame rates up to 120fps.
Capture HDMI + 2ch embedded audio
Loop-through HDMI signal
Audio input via mic
Extract HDMI embedded audio output via headphones
Support HDMI 2.0, 4Kp60 4:4:4 input. Capture from the newest game consoles such as PS4 Pro and XBOX One S
USB Capture SDI Plus
USB 3.0, compatible with USB 2.0
compatible with USB 3.1 Gen 1
Capture videos up to 2048x1080, frame rates up to 120fps.
Capture SD/HD/3G/ 2K SDI + 2ch embedded audio
Loop-through SD/HD/3G/2K SDI
Audio input via Line in
Extract SDI embedded audio and output via Line out
USB Capture SDI 4K Plus
USB 3.0, compatible with USB 2.0
compatible with USB 3.1 Gen 1
Capture videos up to 4096x2160, frame rates up to 120fps.
Capture SD/HD/3G/2K/6G SDI + 2ch embedded audio
Loop-through SD/HD/3G/2K/6G SDI
Audio input via Line in
Extract SDI embedded audio and output via Line out
USB Capture DVI Plus
USB 3.0, compatible with USB 2.0
compatible with USB 3.1 Gen 1
Capture videos up to 4096x2160, frame rates up to 120fps.
Outputs include (actual capture frame rate can be limited by the USB bandwidth and internal working frequency.)
1920x1080p/1280x720p60, 720x576p25, 720x480p30.
Capture DVI / VGA / YPbPr / CVBS / HDMI, plus extra audio line in.
Utility V3 is a software for USB Capture and USB Capture Plus devices. Users can easily check and set the capture-related parameters, upgrade the firmware by themselves and export info needed for technical support with the help of the Utility.
Our USB Capture HDMI and USB Capture HDMI Plus models have now been certified by Zoom for wired content capture with Zoom Rooms. The new certification offers integrators and end-users an added level of confidence that the products have been thoroughly tested for assured compatibility.
USB Capture Pro
Input Loop-through Driver-free installation and automatic input detection for true plug-and-play USB 3.2 Capture operation
USB Capture HDMI 4K Pro
USB 3.2 Gen 2x2
- Capture HDMI + embedded audio
- Loop-through HDMI signal
- Audio input via mic
- Extract HDMI embedded audio output via headphones
- 1-channel 4Kp60 HDMI with loop-through out, mic audio in, 3.5mm audio out. Plug and Play. Windows/Linux/Mac. Host system with 20Gbps USB 3.2 Gen 2x2 port required for 4K/60fps/4:4:4 (Mac limited to 5Gbps or 10Gbps capture performance.
USB Capture SDI 4K Pro
USB 3.2 Gen 2x2
- Capture SDI + embedded audio
- Loop-through SDI signal
- Audio input via Line In
- Extract SDI embedded audio and output via Line Out
- 1-channel 12G SDI with loop-through out, line audio in, 3.5mm audio out. Plug and Play. Windows/Linux/Mac. Host system with 20Gbps USB 3.2 Gen 2x2 port required for 4K/60fps (Mac limited to 5Gbps or 10Gbps capture performance.
Portable Production & Streaming
A portable device that does multi-input switching, graphics, streaming, recording and monitoring
Director Mini
Magewell Director Mini Users can switch between 2x HDMI inputs and 2x USB AV inputs as well as 3x simultaneous live IP sources including SRT streams, RTMP streams or up to 2x NDI® HX sources.
Productions can be streamed via RTMP to popular platforms such as YouTube™ Live, Facebook™ Live, or custom destinations. SRT output supports high-quality remote production workflows, while NDI® HX3 output is ideal for local IP-based production.
Director One
Magewell Director Mini Users can switch between 2x HDMI inputs and 2x USB AV inputs as well as 3x simultaneous live IP sources including SRT streams, RTMP streams or up to 2x NDI® HX sources.
Productions can be streamed via RTMP to popular platforms such as YouTube™ Live, Facebook™ Live, or custom destinations. SRT output supports high-quality remote production workflows, while NDI® HX3 output is ideal for local IP-based production.
With a built-in 4G modem and dedicated 4G and WiFi antennas, Di
Control Hub
Centralized Management Software for Devices and Streams.
- One Management Platform for all Magewell IP Devices.
- Intuitive and efficient Browser-Based interface.
- Control Hub converts between RTMP, SRT (in caller or listener mode), RTSP and transport streams (delivered over UDP or RTP).
- Lite, Basic, Plus and Pro versions.
Please contact us about any question or additional information - info@wit-pro.com